Custom Tailoring

Your piece, made to your wishes.

Every ROXXLYN piece is already one of a kind – its grain exists exactly once. Custom Tailoring takes it a step further: you decide how the Apple logo sits, put your own design on the stone, or tell us which veneer we should pick for you.

You choose every option right on the product page under “Custom Tailoring”. The extra charge is shown next to it, and the order sheet tells you before you buy exactly what we will make.

01 / 07

The Apple logo

Every iPhone carries the Apple logo on its back – the question is how it appears on the stone. We mill it out precisely, fill it in white or gold, place it where you want it, or leave the stone whole.

Apple logo: cut-out in the stone
+ €9,52

Precise cut-out in the stone, revealing the black, satin-matte back of the case beneath.
For iPhone cases
White Apple logo
+ €17,85

The Apple logo CNC-milled and backed with white paint.
For iPhone cases and Fusion Stands
Apple logo: cut-out with 24K gold
+ €59,50

Precise cut-out in the stone, revealing a satin-matte 24-carat gold surface beneath. Allow 3 extra days for production.
For Nero Portoro
Apple logo: centered
+ €5,95

Apple logo cut-out exactly in the center of the skin.
For Slate Skin for iPhone
Apple logo: original position
+ €9,52

Cut-out at the original position of the Apple logo, two thirds of the way up. For iPhone 17 Pro, 17 Pro Max, 18 Pro and 18 Pro Max.
For Slate Skin for iPhone
Apple logo: no cut-out
no extra charge

Continuous stone back without an opening. The stone stays whole.
For Slate Skins
Apple logo: protective film
+ €5,95

Highly transparent, glossy polyurethane film over the logo cut-out. UV-resistant, tear-resistant and self-healing: fine scratches disappear with a little heat.
For Slate Skins with logo cut-out

02 / 07

Your design, your logo

Company logo, initials, a crest or an entire image: we UV-print your design directly onto the veneer. The ink is cured with UV light – the grain of the stone stays visible and becomes part of the image.

For the AirTag Case we can also cut your logo straight out of the stone. In each case, simply send us your file after you order.

UV print: logo
+ €17,85

Your logo UV-printed directly onto the stone. Send us the print file after you order.
For Slate Case Black Rock
UV print: artwork
+ €29,75

Your artwork UV-printed onto the stone surface. Send us the print file after you order.
For Slate Case Black Rock
Your own logo as a cut-out
+ €35,70

We cut your logo out of the stone. Send us the vector file after you order.
For AirTag Case

03 / 07

Your veneer

No two veneers are alike. If you have an idea of how yours should look, tell us – we’ll pick the right one from our stock. Most of these wishes cost nothing extra.

Nero Marquina: deep black marble with white calcite veins, close-up

Darkest possible stone
no extra charge

We select a veneer with the darkest possible tone.
For many cases, skins and the AirTag Case
Darker stone tone
no extra charge

We select a veneer with the darkest possible tone and few white veins. For Nero Marquina.
For Nero Marquina
Pronounced white veins
+ €5,95

We select a veneer with strong white veining. For Nero Marquina.
For Nero Marquina
Lots of gold
no extra charge

We select a veneer with as much gold as possible and strong white veins.
For Nero Portoro
Little gold
no extra charge

We select a veneer with little gold and few white veins, for a calm look.
For Nero Portoro
Most colourful stone
no extra charge

We select the most vividly coloured veneer we have in stock.
For Indian Summer and Transocean

04 / 07

The surface

Slate is split by hand and never polished. You decide how much texture yours should have: flat and calm, or bold with a relief you can feel.

Oberfläche von Black Rock Schiefer aus Rajasthan, gespalten und matt

Fine texture
+ €5,95

Flatter, more even stone surface with less relief. For slate.
For slate cases and Slate Skins
Bold texture
+ €23,80

Pronounced feel with thicker stone sections. For slate.
For slate cases and Slate Skins

05 / 07

More stone

On request we cut further parts from the same veneer – so that the camera, the underside or the tray match the back.

Lens skin
+ €11,90

Matching slate skin for the camera unit, cut from the same veneer.
For slate cases
Bottom skin
+ €23,80

Additional slate skin for the underside of the device, for an all-round look. For MacBook skins.
For Slate Skin for MacBook
Marble instead of the tray
+ €41,65

Instead of the tray, the stand gets a marble surface.
For Marble Fusion Stand
Slate instead of the tray
+ €11,90

Instead of the tray, the stand gets a slate surface.
For Slate Fusion Stand

06 / 07

Everyday use

Real stone that works in everyday life: with a magnetic ring for MagSafe accessories or – on the MacBook skins – with a layer that comes off later without residue.

MagSafe magnet
+ €5,95

N52-grade magnetic ring, 1.55 mm thick. Holds MagSafe accessories securely and makes wireless charging faster and more stable.
For iPhone cases
Easy-removal layer
+ €5,95

Additional release layer beneath the skin. Can be removed at any time without leaving adhesive residue. For MacBook skins.
For Slate Skin for MacBook

07 / 07

Care and gifting

Natural stone needs little care, but the right kind. We add the matching care product to your parcel – and on request we gift-wrap your piece.

Care products and a brush on a light marble surface in sunlight

Marble polish
+ €5,95

Liquid marble polish. Refreshes and protects the surface and adds shine. For marble.
For marble
Stone polish
+ €5,95

Liquid polish for polished stone. Refreshes and protects the surface and adds shine.
For Lapis Lazuli
Slate care
+ €11,90

Liquid care for slate. Protects the surface and refreshes its natural look.
For Slate Fusion Stand
Liquid Care matte
+ €5,95

Care product with dust-repellent, antistatic protection and a lasting matte finish. Developed specifically for the case.
For iPhone cases
Stone cleaner
+ €5,95

Cleaner with antibacterial protection. Cleans gently and preserves the natural look of real slate.
For slate cases
Microfibre cloth
+ €5,95

Soft, high-quality microfibre cloth for polishing. Streak-free shine without scratches, ideal for polished stone.
For marble cases, Lapis and Fusion Stands
Gift wrapping
+ €3,57

We wrap your piece as a gift.
For AirTag Case

Prices as in the configurator and at checkout – calculated for your country.

How it works

01
Choose your product

Pick your case, skin or stand and select your device.
02
Open Custom Tailoring

Below the device, expand Custom Tailoring. It lists every option for this product, each with its extra charge.
03
Review and order

The order sheet sums up your choices before they go into the cart. Every configuration gets its own number.
04
We make it

We make your piece by hand in Mönchengladbach. For UV printing or your own logo, send us your file after you order.