명령

Dear valued customer, first of all thank you for making your purchase with us. Below we are offering some help how to adjust your product correctly.

If you do have any questions, something is not clear please don’t hesitate to contact us at anytime at support@roxxlyn.com – We do speak german, english and russian and looking very much forward to help and assist.

Now you own a Roxxlyn Real Slate Stone AirTag Case, this is the right way to use it smoothly and simply. Please follow this procedure above soft surfaces to avoid damage if the AirTag is dropped.

Please clean all surfaces of your AirTag. That will make things much easier and ensure an even better result.

We also strongly recommend using a small needle to lift the stickers carefully from the remove paper. Simple lift one edge of the sticker carefully and the sticker will not be destroyed when removing. That easy. But no worries we supply an extra set of stickers, just in case.

The Apple AirTag has two sides, one has the metal side which also includes the Apple Logo and engraved details of the Airtags, lets call this side “A”. The white plastic side of the Airtags we call side “B”.

Side A application:

Make sure the Airtag is not in the case right now. To cover the metal Airtags surface kindly remove the larger (for those you have just one sticker size, side A and Side B application is the same)  vinyl sticker and place it in the very center of the Airtag. The sides are a tiny bit overlapping which is correct. Now try to wrap them a little above the edge. From experience we find it helpful to use a lighter and used to apply just some very gentle heat on the wrapped edge which just made it perfect.  That easy.

Side B application:

Make sure you place the Airtag now inside the case, you just need to place it inside the inner frame which is very easy as the material is super flexible. Well done. Now please remove the small vinyl sticker and place just on the very center of the white Airtag plastic surface. This will be the bottom layer which will protect the Airtag. Finally remove the real stone sticker and place just right into the the grove you have and push it together nicely, so it looks just right. That’s it. You are done.

It wasn’t too hard, was it ?If you have any questions, you know how to reach us.

Now that you have a Roxxlyn Real Slate Stone Skin for your new iMac, this is the right way to use it smoothly and easily. Please read the following steps carefully in advance, if you have any questions please contact our support directly at support@roxxlyn.com to clarify possible issues before applying  as it might be too late afterwards.

Now unplug your iMac from power and disconnect all other connectors on the device. We recommend at least 15 minutes of rest for your device before you can finally start.

Please take a solid and stable surface, a desk, dining table or similar, important that you now put a soft cloth as a base on your desk, big enough for the iMac. This will protect your screen during the application. Important, no dust particles or any other particles in this cloth.

Please clean all surfaces especially the back of your iMac. This will make things much easier and ensure an even better result.

Now place the iMac with the display side down on the cloth. In front of you, you can now see the back of your iMac. The iMac is now in a horizontal position.

Next to you you now have the slate skin, this is applied on two pieces silicone liner, as soon as you remove this the adhesive starts to develop its power, so be careful. This real stone sticker consists of 3 up to 4 parts, if should you also have purchased the front cover.

TIP: You can also use both silicone liners if needed at any time, important use the smooth side for the adhesive side of the real stone sticker otherwise your skin will be damaged.

1 – Is the main surface, about 97% of the total area.
2 – is for the lower middle part, here is your power cable later on
3 – is meant to cover the on/off switch of your iMac

TIP: Just as reference as we dont have a video tutorial for the iMac yet, but basically pretty similiar just the silicon liner is different.

Tip:  If needed. Some heat like sun rays or a hair dryer will make the skin a bit more flexible. You can expose it briefly to the sun before attaching it.

Now take the big sticker (1) and stick it on the back of your iMac. Please press the stone surface to your iMac only when you have the desired position on your iMac. With this piece it is recommended to do the alignment with two people. If it still does not quite fit, you can carefully push and pull the stone or carefully remove it completely. Important carefully otherwise unsightly stretch marks arise. This double adhesive is a very special developed one which will leave zero glue when removing.

Please proceed and add sticker part (2) and then part (3) – finally (4)if purchased.

It wasn’t too hard, was it ?If you have any questions, you know how to reach us.

 

Now you own a Roxxlyn Real Marble Stone AirTag Case, this is the right way to use it smoothly and simply. Please follow this procedure above soft surfaces to avoid damage if the AirTag is dropped.

Please clean all surfaces of your AirTag. That will make things much easier and ensure an even better result.

We also strongly recommend using a small needle to lift the stickers carefully from the remove paper. Simple lift one edge of the sticker carefully and the sticker will not be destroyed when removing. That easy. But no worries we supply an extra set of stickers, just in case.

The Apple AirTag has two sides, one has the metal surface which also includes the Apple Logo and engraved details of the Airtags,  the opposite side is a white plastic surface.

Make sure the Airtag is not in the case right now. To cover the metal Airtags surface and white  oposite surface kindly remove the vinyl stickers of your choice and add on top of each side. On the metal surface the sides of the sticker are a tiny bit overlapping which is correct. Now try to wrap them a little above the edge. From experience we find it helpful to use a lighter and  apply just some very gentle heat on the wrapped edge which just made it perfect.

Make sure you place the Airtag now inside the case, you just need to place it inside the inner frame which is very easy as the material is flexible. Well done.

Now please remove the small real marble sticker and place it just in the very center one of the open surfaces and push gently in the center. You may correct the rubber case in pushing and pulling to get the very best result.  That’s it. You are done.

It wasn’t too hard, was it ?If you have any questions, you know how to reach us.

Roxxlyn magnetic wireless charger made the wireless charging fast and convenient by adding real marble. The magnetic body can precisely align the charging product and precisely attach the latest iPhone 12 generations.  Its greatly improves the charging speed. (Power can be up to max. 15W).

This unique charger is compatible for QI wireless charging, so it can work like QI certified charger to charge for iPhone 8 or higher model and Airpods, which are compatible with wireless Charging box and other Qi standard wireless charging phone models wirelessly.

Installation Steps

  1. The LED will flash for a while when power on, then goes off, it means the charger is in standby mode.
  2. Put the products you want to charge into the inductive area of the charger, the blue light will turn on, the devices are charging. The blue light turns on, the products are charging, it turns off when they are fully charged.
  3. The blue light flashes when something touches the FOD function area.
  4. The LED goes off when the charging products are removed, the wireless charger goes into standby mode.

Product specification

Model: Roxxlyn Real Marble Wirless Charger

Materials: Real Marble + Aluminum Body + Alcantara

61,5*61,5″7.Smm

Input QC 5V-2A,9V-l.67A,12V-l.SA

Output SW/7 ,SW/lOW/lSW

Working frequency 100-205kHz

Conversion efficiency ~80% -85°/o

Transmission distance ~3-4mm

Safety instructions

  1. do not disassemble or throw into fire or water. to avoid o short circuit.
  2. do not use the wireless charger in very hot, humid, or corrosive environments to avoid circuit damage and leakage phenomena.
  3. do not place the charger too close to a magnetic stripe or chip cable (ID card cable, smart cards, etc.) to avoid magnetic failure.
  4. please keep a distance of at least 20 cm from implantable medical devices. Avoid interference with the medical device.
  5. Pay attention to your children not to use the wireless charger to avoid unnecessary accidents.

Notes

  1. Please use a qualified AC adapter. The AC adapter should be 9V / 2A or QC 3.0 or higher, otherwise insufficient input current may cause unstable charging.
  2. do not insert too many magnetic strips or smart cards (ID cards, bank cards, etc.) to avoid magnetic errors. Make sure that the disk does not get too hot. If the disk is too hot, remove your phone from the disk the disk and turn off the disk. The plate may turn off automatically if it is too hot. When the plate has cooled down, try charging again.

The LED indicator will continue to flash, or the charging pad will turn off by itself if the charging process goes wrong.

FAQ and solution

  1. Why the led indicator keeps flashing and my phone do not charge? -Make sure your mobile device supports Qi-standard. -Make sure you find the right charging position. – Please make sure you use 9V-2A or QC 3.0 or higher AC adapter.
  1. Why it charges slower than my original adapter come with the mobile device? – The current for wireless charging, from the phone itself or the external receiver coilis different. -When the phone is charging, the standby power consumption is high. Therefore, it is recommended to reduce the phone’s standby program.
  1. Is the radiation of wireless charging harmful to health? The wireless charger of the charger emits non-ionizing radiation, which is not harmful to humans.
  1. My device gets hot while charging, is this normal? If you do not charge your device in a good charging area, the heat dissipation may not be good and your phone will get hot during charging. The charger has an overheating protection function.
  1. Is the watch not charging? The watch is probably not in the correct position. Reposition the device.

Warranty

We provide all our customers with 12 months warranty from the date of purchase.

International Standards

ROHS, CE, FC, QI

So you now own a Roxxlyn iPhone Case, this is the right way to use it smoothly and simply. Please follow this procedure above soft surfaces to avoid damage if the phone is dropped.

Simply place your phone inside the case. this is a one-piece case and it will just fit perfectly.

It wasn’t too hard, was it ?If you have any questions, you know how to reach us.

PLEASE NOTE:

We have made changes on backing paper to make it even more comfortable and easy for you to apply. The white backing paper is more easy to remove and the best you can use the silicon side (fully white) during the application to your convenience.

Also if you need any further flexibility for the stone please expose the stone for about 2 minutes into the sun or simply use a hair dryer to apply some gentle heat, important no straight heat. The stone will get more flexible straight away but this effect will get lost when cooling down. From experience we suggest placing the skin before you start with the application procedure on your device to get a feeling on how it should looks like, ask yourself do I really need more flexibility? Mostly not.

Any question before the application please reach out, we are right at your fingertips.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut laboure et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco labis nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Exceptioneur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est labum.

So you now own a Roxxlyn iPhone Case, this is the right way to use it smoothly and simply. Please follow this procedure above soft surfaces to avoid damage if the phone is dropped.

First, the case comes in two parts : the frame, and the section that covers the back. The two parts are connected by a magnetic closure. As you can see, there is a small notch on the top of the case. You will have to pull it slightly to open and release those two parts.

Once the case is opened, please place your iPhone inside of the frame, screen side down. Then put the back cover section bottom first into the case to fit into the edges on the frame and close the back section starting from the bottom, fully on to the frame. Now your iphone hold in place perfectly.

It wasn’t too hard, was it ?If you have any questions, you know how to reach us.

닫기
로그인
닫기
카트 (0)

장바구니에 상품이 없습니다. 장바구니에 상품이 없습니다.





닫기